How to Make a Spooky Witch Lantern

Originally posted 2012-09-29 08:00:09.

Make a Cute Lantern for Halloween

October is just around the corner which means our annual shindig is only a few weeks away… Yikes, I need to get busy! Today I will share another cheap and easy project using a few things from the dollar store – how to make a spooky witch lantern!

How to Make a Spooky Witch Lantern

Materials:

  • Four wood picture frames
  • Plywood to create the bottom of the lantern
  • Vellum (<– affiliate link!)
  • Witch silhouette clipart
  • Wire for handle
  • Glass knobs for feet
  • Tea light candle and holder or flameless candle

I began by removing the glass and backing from the picture frames. I set the glass aside to use later!

How to Make a Spooky Witch Lantern small wood frames

I used a computer program to position the witch to print on the vellum. I wanted to print at least two images per sheet of paper. I adjusted the size of the witch according to the size of the frames. I found this particular witch silhouette at Clipartof.  (It was free!)

How to Make a Spooky Witch Lantern printed clipart on vellum

I created a box with the picture frames using glue and brad nails. The wood felt a little rough so I sanded with a fine sanding sponge.

How to Make a Spooky Witch Lantern glue and nail frames to form a box

I cut a piece of plywood to use as the bottom and secured it in place using glue and brad nails.

How to Make a Spooky Witch Lantern cut plywood fort he bottom

I spray painted the entire assembly with Satin Black paint.

How to Make a Spooky Witch Lantern spray paint entire assembly

Since I plan on using a regular tealight candle, I put the glass behind the paper in the frame. (If a flameless candle is being used, the paper can go behind the glass like a normal picture frame.)

How to Make a Spooky Witch Lantern add paper and glass

I glued clear glass drawer knobs on the bottom to act as feet. Other options include cork, sewing bobbins, or decorative upholstery tacks, maybe even a candleholder or two!

How to Make a Spooky Witch Lantern glass knobs as feet

I drilled small holes in the top of two of the frames to add a handle. The hole was drilled at an angle from the top into the side like a pocket hole. I cut three lengths of wire, each 18″ long, and twisted them together to form the handle.

How to Make a Spooky Witch Lantern hole drilled for handle

I cut a piece of punched aluminum and spray painted it black to diffuse the light at the top. I folded the ends down to fit into the opening of the box, then added a twisted wire loop to the top. (The loop is not shown.)

How to Make a Spooky Witch Lantern mesh top

Cute! Here she is all lit up!

How to Make a Spooky Witch Lantern lit from within

When I make another lantern, I’ll orient the frames in the other direction for a different look! Make a few candy dishes to match…

How to Make a Spooky Witch Lantern SANY1424

Have any other ideas on how to make a spooky witch lantern? Leave a comment below!

9 Comments

Leave a Reply to CherTexter Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.