How to Make Glass Knob Wall Hooks

Originally posted 2012-09-08 08:00:48.

Make Beautiful Wall Hooks with Glass Door Knobs

Here is another accessory I saw at the local craft store. The price on these cute hooks wasn’t bad ($9.99) but I wanted to make them instead as I already had the glass knobs at home! I bought the frames at the dollar store – I used 3-1/2″ x 5″ frames. I think these would make fantastic gifts for some of The Han’s friends… Unless I decide to keep them for myself!! Let me show you how to make glass knob wall hooks…

How to Make Glass Knob Wall Hooks

Materials:

  • Drill
  • Forstner bit & brad-point bit
  • Glass knob (<– affiliate link!)
  • 1″ long bolt to fit into knob
  • Picture frame
  • Plywood cut to fit into the frame opening ( I used scraps of Purebond plywood)
  • Spray paint
  • Scrapbooking paper
  • Mod Podge
  • Liquid Nails
  • Soda can tab (for hanger)

Remove the glass and back from the frame. Cut a piece of wood to fit into the frame opening. I used a 5/8″ Forstner bit to create a hole for the bolt. Do not drill all of the way through the board. Use the bolt itself to check the depth of the hole. The top of the bolt head should fit flush with the back of the board.

How to Make Glass Knob Wall Hooks forstner bit

How to Make Glass Knob Wall Hooks drill shallow hole in board

How to Make Glass Knob Wall Hooks hole should be deep enough for a bolt head

I used a 1/4″ brad-point bit to drill the hole completely through the board for the bolt.

How to Make Glass Knob Wall Hooks brad point drill bit

How to Make Glass Knob Wall Hooks drill hole in board

Paint the edges with spray paint (I used Rust-Oleum in Lagoon, Eden, and Aubergine, as well as Valspar in Frosty Berry) then paint the frame the same color.

How to Make Glass Knob Wall Hooks spray paint the board

How to Make Glass Knob Wall Hooks spray paint the frames

After the paint dries, apply a coat of Mod Podge to the top of the board and apply the scrapbooking paper.

How to Make Glass Knob Wall Hooks apply mod podge and paper

Apply a few dabs of Liquid Nails to the opening of the frame and insert the board with the paper showing through the front.

How to Make Glass Knob Wall Hooks apply adhesive to edges of board

How to Make Glass Knob Wall Hooks place board in frame

Add the soda can tab (or sawtooth hanger) to the back.  Insert the bolt, and attach the knob. Tighten the set screw on the knob to keep it secure.

How to Make Glass Knob Wall Hooks soda can tab hanger for back

How to Make Glass Knob Wall Hooks make sure bolt fits knob

How to Make Glass Knob Wall Hooks thread bolt through back of board

How to Make Glass Knob Wall Hooks secure knob on other side

I made four of them in various colors!

How to Make Glass Knob Wall Hooks finished hangers

How to Make Glass Knob Wall Hooks hanging on cabinet

Such a cheap and easy project, and the wall hooks would make great gifts! This cork board wall art would pair nicely with the hooks! Any questions about how to make glass knob wall hooks? Leave a comment below!

5 Comments

Leave a Reply to CherTexter Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.